Dormer E0237/16 5974196 UNC Machine Tap Spiral Flute 45° 3FL 7/16 inch x 14
- Write a review
$54.10
Basic StandardISO 529Clamping Length - millimeter (LSC)9Clamping width - inch0.248Clamping width - millimeter (WSC)11.112CoatingSteam TemperedConnection diameter - inch (DCON MS)8Connection diameter - millimeter (DCON MS)6.3EDP number569467Flute count (NOF)3Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)45Hand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number5974196Ordering code ANSIE0237/16Overall length - inch (OAL)3.3465Overall length - millimeter (OAL)85Premachined hole diameter - inch (PHD)0.3701Premachined hole diameter - millimeter (PHD)45ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter - inch (TD)0.4375Thread diameter - millimeter (TD)9.4Thread diameter size (TDZ)7/16Thread form (THFT)UNC - Unified CoarseThreading length - inch (THL)0.748Threading length - millimeter (THL)19Threads per inch (TPI)14Tolerance limitH5Usable length (ULDR)2.5
Specifications
| Basic Standard | ISO 529 |
| Clamping Length - millimeter (LSC) | 9 |
| Clamping width - inch | 0.248 |
| Clamping width - millimeter (WSC) | 11.112 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 8 |
| Connection diameter - millimeter (DCON MS) | 6.3 |
| EDP number | 569467 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 45 |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 5974196 |
| Ordering code ANSI | E0237/16 |
| Overall length - inch (OAL) | 3.3465 |
| Overall length - millimeter (OAL) | 85 |
| Premachined hole diameter - inch (PHD) | 0.3701 |
| Premachined hole diameter - millimeter (PHD) | 45 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - inch (TD) | 0.4375 |
| Thread diameter - millimeter (TD) | 9.4 |
| Thread diameter size (TDZ) | 7/16 |
| Thread form (THFT) | UNC - Unified Coarse |
| Threading length - inch (THL) | 0.748 |
| Threading length - millimeter (THL) | 19 |
| Threads per inch (TPI) | 14 |
| Tolerance limit | H5 |
| Usable length (ULDR) | 2.5 |
5974196
