Dormer S248HA5/8XR.045 7648920 Corner Radius End Mill 5/8 inch
- Write a review
$160.00
Basic StandardDORMERCoatingAlTiNCoating property (CTP)1Connection diameter - fractional inch (DCON MS)5/8Connection diameter - inch (DCON MS)0.625Connection diameter - millimeter (DCON MS)15.88Corner radius - inch (RE)0.045Cut lengthMediumCutting diameter - fractional inch (DC)5/8Cutting diameter - inch (DC)0.625Cutting diameter - millimeter (DC)15.88Cutting diameter tolerance class (TCDC)ANSI +.000/-.002Depth of cut maximum - fractional inch (APMX)1.1/4EDP number7648920Flute count (NOF)5Flute helix unequal1MaterialHMMID number7648920Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS248HA5/8XR.045Overall length - fractional inch (OAL)3.1/2Overall length - inch (OAL)3.5Overall length - millimeter (OAL)88.9Radial rake angle (GAMF)8ShankCylindrical shank DIN 6535 HA
Specifications
| Basic Standard | DORMER |
| Coating | AlTiN |
| Coating property (CTP) | 1 |
| Connection diameter - fractional inch (DCON MS) | 5/8 |
| Connection diameter - inch (DCON MS) | 0.625 |
| Connection diameter - millimeter (DCON MS) | 15.88 |
| Corner radius - inch (RE) | 0.045 |
| Cut length | Medium |
| Cutting diameter - fractional inch (DC) | 5/8 |
| Cutting diameter - inch (DC) | 0.625 |
| Cutting diameter - millimeter (DC) | 15.88 |
| Cutting diameter tolerance class (TCDC) | ANSI +.000/-.002 |
| Depth of cut maximum - fractional inch (APMX) | 1.1/4 |
| EDP number | 7648920 |
| Flute count (NOF) | 5 |
| Flute helix unequal | 1 |
| Material | HM |
| MID number | 7648920 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S248HA5/8XR.045 |
| Overall length - fractional inch (OAL) | 3.1/2 |
| Overall length - inch (OAL) | 3.5 |
| Overall length - millimeter (OAL) | 88.9 |
| Radial rake angle (GAMF) | 8 |
| Shank | Cylindrical shank DIN 6535 HA |
7648920
