Dormer S8239.0 7106977 Slot Drill N Standard 9.00 mm
- Write a review
$92.25
Basic StandardDORMERCoatingAlCrNCoating property (CTP)1Connection diameter - inch (DCON MS)0.3937Connection diameter - millimeter (DCON MS)10Connection diameter tolerance machine side (TCDCONMS)h6Corner chamfer width - millimeter (CHW)0.2Cut lengthMediumCutting diameter - inch (DC)0.3543Cutting diameter - millimeter (DC)9Cutting diameter tolerance class (TCDC)h9Depth of cut maximum - inch (APMX)0.8268Depth of cut maximum - millimeter (APMX)21EDP number47106977Flute count (NOF)3Flute helix angle (FHA)28MaterialHMMaterial applicationK - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steelMID number7106977Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS8239.0Overall length - inch (OAL)2.8346Overall length - millimeter (OAL)72Peripheral effective cutting edge count (ZEFP)3Radial rake angle (GAMF)9ShankCylindrical shank DIN 6535 HA
Specifications
| Basic Standard | DORMER |
| Coating | AlCrN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.3937 |
| Connection diameter - millimeter (DCON MS) | 10 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Corner chamfer width - millimeter (CHW) | 0.2 |
| Cut length | Medium |
| Cutting diameter - inch (DC) | 0.3543 |
| Cutting diameter - millimeter (DC) | 9 |
| Cutting diameter tolerance class (TCDC) | h9 |
| Depth of cut maximum - inch (APMX) | 0.8268 |
| Depth of cut maximum - millimeter (APMX) | 21 |
| EDP number | 47106977 |
| Flute count (NOF) | 3 |
| Flute helix angle (FHA) | 28 |
| Material | HM |
| Material application | K - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 7106977 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S8239.0 |
| Overall length - inch (OAL) | 2.8346 |
| Overall length - millimeter (OAL) | 72 |
| Peripheral effective cutting edge count (ZEFP) | 3 |
| Radial rake angle (GAMF) | 9 |
| Shank | Cylindrical shank DIN 6535 HA |
7106977
