Dormer E207M5 5975731 Machine Tap Spiral Flute 15° 3FL M5 x 0.80 mm
- Write a review
$18.49
Basic StandardDIN 371Clamping Length - millimeter (LSC)8Clamping width - inch0.1929Clamping width - millimeter (WSC)4.9CoatingBrightConnection diameter - inch (DCON MS)6Connection diameter - millimeter (DCON MS)4.9EDP number85417Flute count (NOF)3Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)15Hand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number5975731Ordering code ANSIE207M5Overall length - inch (OAL)2.7559Overall length - millimeter (OAL)70Premachined hole diameter - inch (PHD)0.1654Premachined hole diameter - millimeter (PHD)15ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter - millimeter (TD)4.2Thread diameter size (TDZ)5Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0315Thread pitch - millimeter (TP)0.8Threading length - inch (THL)0.5118Threading length - millimeter (THL)13Usable length (ULDR)1.5Usable Length - inch (LU)0.9843Usable Length - millimeter (LU)25
Specifications
| Basic Standard | DIN 371 |
| Clamping Length - millimeter (LSC) | 8 |
| Clamping width - inch | 0.1929 |
| Clamping width - millimeter (WSC) | 4.9 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 6 |
| Connection diameter - millimeter (DCON MS) | 4.9 |
| EDP number | 85417 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 15 |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 5975731 |
| Ordering code ANSI | E207M5 |
| Overall length - inch (OAL) | 2.7559 |
| Overall length - millimeter (OAL) | 70 |
| Premachined hole diameter - inch (PHD) | 0.1654 |
| Premachined hole diameter - millimeter (PHD) | 15 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - millimeter (TD) | 4.2 |
| Thread diameter size (TDZ) | 5 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0315 |
| Thread pitch - millimeter (TP) | 0.8 |
| Threading length - inch (THL) | 0.5118 |
| Threading length - millimeter (THL) | 13 |
| Usable length (ULDR) | 1.5 |
| Usable Length - inch (LU) | 0.9843 |
| Usable Length - millimeter (LU) | 25 |
5975731
