Dormer S52416.0XR3.0 6706668 Corner Radius End Mill 16.00 mm x 3.0 mm
- Write a review
$366.63
Basic StandardDORMERCoatingTiSiNCoating property (CTP)1Connection diameter - inch (DCON MS)0.6299Connection diameter - millimeter (DCON MS)16Corner radius - inch (RE)0.1181Corner radius - millimeter (RE)3Cut lengthExtra shortCutting diameter - inch (DC)0.6299Cutting diameter - millimeter (DC)16Cutting diameter tolerance class (TCDC)h9Depth of cut maximum - inch (APMX)0.8661Depth of cut maximum - millimeter (APMX)22EDP number46706668Flute count (NOF)4Flute helix angle (FHA)40MaterialHMMaterial applicationH - Hardened materialsMID number6706668Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsNeck diameter - inch (DN)0.5906Neck diameter - millimeter (DN)15Ordering code ANSIS52416.0XR3.0Overall length - inch (OAL)4.9213Overall length - millimeter (OAL)125Peripheral effective cutting edge count (ZEFP)4Radial rake angle (GAMF)-6ShankCylindrical shank DIN 6535 HAUsable Length - millimeter (LU)85
Specifications
| Basic Standard | DORMER |
| Coating | TiSiN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.6299 |
| Connection diameter - millimeter (DCON MS) | 16 |
| Corner radius - inch (RE) | 0.1181 |
| Corner radius - millimeter (RE) | 3 |
| Cut length | Extra short |
| Cutting diameter - inch (DC) | 0.6299 |
| Cutting diameter - millimeter (DC) | 16 |
| Cutting diameter tolerance class (TCDC) | h9 |
| Depth of cut maximum - inch (APMX) | 0.8661 |
| Depth of cut maximum - millimeter (APMX) | 22 |
| EDP number | 46706668 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 40 |
| Material | HM |
| Material application | H - Hardened materials |
| MID number | 6706668 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Neck diameter - inch (DN) | 0.5906 |
| Neck diameter - millimeter (DN) | 15 |
| Ordering code ANSI | S52416.0XR3.0 |
| Overall length - inch (OAL) | 4.9213 |
| Overall length - millimeter (OAL) | 125 |
| Peripheral effective cutting edge count (ZEFP) | 4 |
| Radial rake angle (GAMF) | -6 |
| Shank | Cylindrical shank DIN 6535 HA |
| Usable Length - millimeter (LU) | 85 |
6706668
