Pramet RC 20-F:M4310 7637796 Milling Insert - Copy and Profile
- Write a review
$45.08
ChipbreakerFCoatingM4310Coating processPVDCoating property (CTP)1Cooling effectSlightly negative effect on tool lifeDepth of cut maximum - inch (APMX)0.079Depth of cut maximum - millimeter (APMX)2Depth of cut minimum - inch (APMN)0.02Depth of cut minimum - millimeter (APMN)0.5Feed maximal - millimeter0.5Feed minimal - millimeter0.05Feed_MAX_IMP_NUM0.02Feed_MIN_IMP_NUM0.002Fixing hole diameter - inch (D1)0.197Fixing hole diameter - millimeter (D1)5Insert cutting diameter - inch (CDI)0.787Insert cutting diameter - millimeter (CDI)20Insert length - inch (INSL)0.63Insert thickness - inch (S)0.118Insert thickness - millimeter (S)3
Specifications
| Chipbreaker | F |
| Coating | M4310 |
| Coating process | PVD |
| Coating property (CTP) | 1 |
| Cooling effect | Slightly negative effect on tool life |
| Depth of cut maximum - inch (APMX) | 0.079 |
| Depth of cut maximum - millimeter (APMX) | 2 |
| Depth of cut minimum - inch (APMN) | 0.02 |
| Depth of cut minimum - millimeter (APMN) | 0.5 |
| Feed maximal - millimeter | 0.5 |
| Feed minimal - millimeter | 0.05 |
| Feed_MAX_IMP_NUM | 0.02 |
| Feed_MIN_IMP_NUM | 0.002 |
| Fixing hole diameter - inch (D1) | 0.197 |
| Fixing hole diameter - millimeter (D1) | 5 |
| Insert cutting diameter - inch (CDI) | 0.787 |
| Insert cutting diameter - millimeter (CDI) | 20 |
| Insert length - inch (INSL) | 0.63 |
| Insert thickness - inch (S) | 0.118 |
| Insert thickness - millimeter (S) | 3 |
RC 20-F:M4310
