Dormer E806M4 7812146 DIN-ANSI M Machine Tap Black Shark for Hard Alloys Spiral Flute
- Write a review
$33.06
Basic StandardDIN/ANSIClamping Length - millimeter (LSC)6.35Clamping width - inch0.15CoatingTiAlN/TopCoating property (CTP)1Connection diameter - inch (DCON MS)0.194Connection diameter - millimeter (DCON MS)4.93Coolant supply property (CSP)N30EDP number7812146Flute count (NOF)3Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)15Hand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steel, S - High-temperature alloysMID number7812146Ordering code ANSIE806M4Overall length - inch (OAL)2.7559Overall length - millimeter (OAL)0.194Premachined hole diameter - imperial (PHD)N30Premachined hole diameter - inch (PHD)0.1299Premachined hole diameter - millimeter (PHD)15Tap chamfer style (TCS)C 2 - 3Thread diameter - millimeter (TD)3.3Thread diameter size (TDZ)4Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0276Thread pitch - millimeter (TP)0.7Threading length - inch (THL)0.6102Threading length - millimeter (THL)15.5Tolerance limitD4Usable length (ULDR)1.5Usable Length - inch (LU)1.1024Usable Length - millimeter (LU)28
Specifications
| Basic Standard | DIN/ANSI |
| Clamping Length - millimeter (LSC) | 6.35 |
| Clamping width - inch | 0.15 |
| Coating | TiAlN/Top |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.194 |
| Connection diameter - millimeter (DCON MS) | 4.93 |
| Coolant supply property (CSP) | N30 |
| EDP number | 7812146 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 15 |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel, S - High-temperature alloys |
| MID number | 7812146 |
| Ordering code ANSI | E806M4 |
| Overall length - inch (OAL) | 2.7559 |
| Overall length - millimeter (OAL) | 0.194 |
| Premachined hole diameter - imperial (PHD) | N30 |
| Premachined hole diameter - inch (PHD) | 0.1299 |
| Premachined hole diameter - millimeter (PHD) | 15 |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - millimeter (TD) | 3.3 |
| Thread diameter size (TDZ) | 4 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0276 |
| Thread pitch - millimeter (TP) | 0.7 |
| Threading length - inch (THL) | 0.6102 |
| Threading length - millimeter (THL) | 15.5 |
| Tolerance limit | D4 |
| Usable length (ULDR) | 1.5 |
| Usable Length - inch (LU) | 1.1024 |
| Usable Length - millimeter (LU) | 28 |
7812146