Dormer C27318.0 5984618 End Mill N 844 L 18.00 mm
- Write a review
$99.91
Basic StandardDIN 844 LCoatingBrightConnection diameter - inch (DCON MS)0.6299Connection diameter - millimeter (DCON MS)16Cut lengthLongCutting diameter - inch (DC)0.7087Cutting diameter - millimeter (DC)18Cutting diameter tolerance class (TCDC)k10Depth of cut maximum - inch (APMX)2.4803Depth of cut maximum - millimeter (APMX)63EDP number354957Flute count (NOF)4Flute helix angle (FHA)30MaterialHSS-E-PMMaterial applicationN - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloysMID number5984618Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsNeck diameter - inch (DN)0.6102Neck diameter - millimeter (DN)15.5Ordering code ANSIC27318.0Overall length - inch (OAL)4.8425Overall length - millimeter (OAL)123Peripheral effective cutting edge count (ZEFP)4Radial rake angle (GAMF)12ShankWeldon shank DIN 1835BUsable Length - millimeter (LU)74.5
Specifications
| Basic Standard | DIN 844 L |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.6299 |
| Connection diameter - millimeter (DCON MS) | 16 |
| Cut length | Long |
| Cutting diameter - inch (DC) | 0.7087 |
| Cutting diameter - millimeter (DC) | 18 |
| Cutting diameter tolerance class (TCDC) | k10 |
| Depth of cut maximum - inch (APMX) | 2.4803 |
| Depth of cut maximum - millimeter (APMX) | 63 |
| EDP number | 354957 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 30 |
| Material | HSS-E-PM |
| Material application | N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 5984618 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Neck diameter - inch (DN) | 0.6102 |
| Neck diameter - millimeter (DN) | 15.5 |
| Ordering code ANSI | C27318.0 |
| Overall length - inch (OAL) | 4.8425 |
| Overall length - millimeter (OAL) | 123 |
| Peripheral effective cutting edge count (ZEFP) | 4 |
| Radial rake angle (GAMF) | 12 |
| Shank | Weldon shank DIN 1835B |
| Usable Length - millimeter (LU) | 74.5 |
5984618
