Dormer A221N7 5969109 118° Centre Drill - 60° Short ANSI N7
- Write a review
$27.97
ApplicationAngleIcon_DICT_SELCenter drilling 60°Basic StandardANSICoatingBrightConnection diameter - fractional inch (DCON MS)5/8Connection diameter - inch (DCON MS)0.625Connection diameter - millimeter (DCON MS)15.88Cutting diameter - fractional inch (DC)1/4Cutting diameter - inch (DC)0.25Cutting diameter - millimeter (DC)6.35EDP number241929Hand (Cutting direction)RightInternal designation number7Length chip flute - fractional inch (LCF)1/4MaterialHSS-EMaterial applicationK - Cast iron, P - Steel and cast steelMID number5969109Ordering code ANSIA221N7Overall length - fractional inch (OAL)3.1/4Overall length - millimeter (OAL)82.55Point Angle (SIG)118ShankCylindrical shankStep included angle (STA)60Usable length (ULDR)1.5
Specifications
| ApplicationAngleIcon_DICT_SEL | Center drilling 60° |
| Basic Standard | ANSI |
| Coating | Bright |
| Connection diameter - fractional inch (DCON MS) | 5/8 |
| Connection diameter - inch (DCON MS) | 0.625 |
| Connection diameter - millimeter (DCON MS) | 15.88 |
| Cutting diameter - fractional inch (DC) | 1/4 |
| Cutting diameter - inch (DC) | 0.25 |
| Cutting diameter - millimeter (DC) | 6.35 |
| EDP number | 241929 |
| Hand (Cutting direction) | Right |
| Internal designation number | 7 |
| Length chip flute - fractional inch (LCF) | 1/4 |
| Material | HSS-E |
| Material application | K - Cast iron, P - Steel and cast steel |
| MID number | 5969109 |
| Ordering code ANSI | A221N7 |
| Overall length - fractional inch (OAL) | 3.1/4 |
| Overall length - millimeter (OAL) | 82.55 |
| Point Angle (SIG) | 118 |
| Shank | Cylindrical shank |
| Step included angle (STA) | 60 |
| Usable length (ULDR) | 1.5 |
5969109
