1700M10X1.5NO3 1012485 Hand Tap M10 x 1.50 mm
- Write a review
$12.85
Basic StandardANSIClamping width - inch0.286CoatingBrightConnection diameter - inch (DCON MS)0.381Connection diameter - millimeter (DCON MS)9.68Flute count (NOF)4Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSSOverall length - fractional inch (OAL)2.15/16Overall length - inch (OAL)2.9375ShankCylindrical shank with SquareThread diameter size (TDZ)M10Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0591Thread pitch - millimeter (TP)1.5Threading length - fractional inch (THL)1.1/4Tolerance limitD6Usable length (ULDR)1.5
Specifications
| Basic Standard | ANSI |
| Clamping width - inch | 0.286 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.381 |
| Connection diameter - millimeter (DCON MS) | 9.68 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Overall length - fractional inch (OAL) | 2.15/16 |
| Overall length - inch (OAL) | 2.9375 |
| Shank | Cylindrical shank with Square |
| Thread diameter size (TDZ) | M10 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0591 |
| Thread pitch - millimeter (TP) | 1.5 |
| Threading length - fractional inch (THL) | 1.1/4 |
| Tolerance limit | D6 |
| Usable length (ULDR) | 1.5 |
1700M10X1.5NO3
