Dormer E8147/8 7350220 Machine Tap White Shark for Cast Iron Semi Bottoming 4FL 7/8 inch x 9
- Write a review
$75.50
Basic StandardDIN/ANSIClamping width - inch0.52CoatingTiAlN/TopCoating property (CTP)1Connection diameter - inch (DCON MS)0.697Connection diameter - millimeter (DCON MS)17.7EDP number7350220Flute count (NOF)4Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationK - Cast iron, N - Non-ferrous metalsMID number7350220Ordering code ANSIE8147/8Overall length - inch (OAL)5.512Premachined hole diameter - imperial (PHD)49/64Premachined hole diameter - inch (PHD)0.7677Premachined hole diameter - millimeter (PHD)19.5ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter - millimeter (TD)49/64Thread diameter size (TDZ)7/8Thread form (THFT)UNC - Unified CoarseThreading length - inch (THL)1.339Threads per inch (TPI)9Tolerance limitH6Usable length (ULDR)2
Specifications
| Basic Standard | DIN/ANSI |
| Clamping width - inch | 0.52 |
| Coating | TiAlN/Top |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.697 |
| Connection diameter - millimeter (DCON MS) | 17.7 |
| EDP number | 7350220 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | K - Cast iron, N - Non-ferrous metals |
| MID number | 7350220 |
| Ordering code ANSI | E8147/8 |
| Overall length - inch (OAL) | 5.512 |
| Premachined hole diameter - imperial (PHD) | 49/64 |
| Premachined hole diameter - inch (PHD) | 0.7677 |
| Premachined hole diameter - millimeter (PHD) | 19.5 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - millimeter (TD) | 49/64 |
| Thread diameter size (TDZ) | 7/8 |
| Thread form (THFT) | UNC - Unified Coarse |
| Threading length - inch (THL) | 1.339 |
| Threads per inch (TPI) | 9 |
| Tolerance limit | H6 |
| Usable length (ULDR) | 2 |
7350220