Pramet LC 1010-KP:M8330 7637600 Milling Insert - Copy and Profile
- Write a review
$38.21
ChipbreakerKPCoatingM8330Coating processPVDCoating property (CTP)1Cooling effectSlightly negative effect on tool lifeCorner radius - inch (RE)0.039Corner radius - millimeter (RE)1Cutting edge length - inch (L)0.453Cutting edge length - millimeter (L)11.5Depth of cut maximum - inch (APMX)0.039Depth of cut maximum - millimeter (APMX)1Depth of cut minimum - inch (APMN)0.004Depth of cut minimum - millimeter (APMN)0.1Feed maximal - millimeter0.25Feed minimal - millimeter0.08Feed_MAX_IMP_NUM0.01Feed_MIN_IMP_NUM0.003Fixing hole diameter - inch (D1)0.157Fixing hole diameter - millimeter (D1)4Insert cutting diameter - inch (CDI)0.394Insert cutting diameter - millimeter (CDI)10Insert thickness - inch (S)0.098Insert thickness - millimeter (S)2.5
Specifications
| Chipbreaker | KP |
| Coating | M8330 |
| Coating process | PVD |
| Coating property (CTP) | 1 |
| Cooling effect | Slightly negative effect on tool life |
| Corner radius - inch (RE) | 0.039 |
| Corner radius - millimeter (RE) | 1 |
| Cutting edge length - inch (L) | 0.453 |
| Cutting edge length - millimeter (L) | 11.5 |
| Depth of cut maximum - inch (APMX) | 0.039 |
| Depth of cut maximum - millimeter (APMX) | 1 |
| Depth of cut minimum - inch (APMN) | 0.004 |
| Depth of cut minimum - millimeter (APMN) | 0.1 |
| Feed maximal - millimeter | 0.25 |
| Feed minimal - millimeter | 0.08 |
| Feed_MAX_IMP_NUM | 0.01 |
| Feed_MIN_IMP_NUM | 0.003 |
| Fixing hole diameter - inch (D1) | 0.157 |
| Fixing hole diameter - millimeter (D1) | 4 |
| Insert cutting diameter - inch (CDI) | 0.394 |
| Insert cutting diameter - millimeter (CDI) | 10 |
| Insert thickness - inch (S) | 0.098 |
| Insert thickness - millimeter (S) | 2.5 |
LC 1010-KP:M8330
