Pramet 075N2R126W075-ISSE09-C 6789712 End Milling Cutter - Face
- Write a review
$306.41
Axial rake angle (GAMP)20Clamping Type Code (MTP)Screw clamping through holeConnection diameter - inch (DCON MS)0.75Connection diameter - millimeter (DCON MS)19.1Coolant supply property (CSP)1Cutting diameter - inch (DC)0.75Cutting diameter - millimeter (DC)19.1Cutting diameter maximum - inch (DCX)1.136Cutting diameter maximum - millimeter (DCX)28.9Hand (Cutting direction)RightOverall length - inch (OAL)3.331Overall length - millimeter (OAL)85Peripheral effective cutting edge count (ZEFP)2Radial rake angle (GAMF)-5Rotational speed maximum (RPMX)24600ShankWeldon shank DIN 1835BUsable Length - inch (LU)1.26
Specifications
| Axial rake angle (GAMP) | 20 |
| Clamping Type Code (MTP) | Screw clamping through hole |
| Connection diameter - inch (DCON MS) | 0.75 |
| Connection diameter - millimeter (DCON MS) | 19.1 |
| Coolant supply property (CSP) | 1 |
| Cutting diameter - inch (DC) | 0.75 |
| Cutting diameter - millimeter (DC) | 19.1 |
| Cutting diameter maximum - inch (DCX) | 1.136 |
| Cutting diameter maximum - millimeter (DCX) | 28.9 |
| Hand (Cutting direction) | Right |
| Overall length - inch (OAL) | 3.331 |
| Overall length - millimeter (OAL) | 85 |
| Peripheral effective cutting edge count (ZEFP) | 2 |
| Radial rake angle (GAMF) | -5 |
| Rotational speed maximum (RPMX) | 24600 |
| Shank | Weldon shank DIN 1835B |
| Usable Length - inch (LU) | 1.26 |
6789712
