Dormer S804HB8.0 5983500 End Mill N 6527 K 8.00 mm
- Write a review
$72.86
Basic StandardDIN 6527 KCoatingAlCrNCoating property (CTP)1Connection diameter - inch (DCON MS)0.315Connection diameter - millimeter (DCON MS)8Corner chamfer width - millimeter (CHW)0.13Cut lengthExtra shortCutting diameter - inch (DC)0.315Cutting diameter - millimeter (DC)8Cutting diameter tolerance class (TCDC)h10Depth of cut maximum - inch (APMX)0.4724Depth of cut maximum - millimeter (APMX)12EDP number641767Flute count (NOF)4Flute helix angle (FHA)34MaterialHMMaterial applicationK - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steelMID number5983500Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS804HB8.0Overall length - inch (OAL)2.2835Overall length - millimeter (OAL)58Peripheral effective cutting edge count (ZEFP)4Radial rake angle (GAMF)9ShankCylindrical shank DIN 6535 HB
Specifications
| Basic Standard | DIN 6527 K |
| Coating | AlCrN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.315 |
| Connection diameter - millimeter (DCON MS) | 8 |
| Corner chamfer width - millimeter (CHW) | 0.13 |
| Cut length | Extra short |
| Cutting diameter - inch (DC) | 0.315 |
| Cutting diameter - millimeter (DC) | 8 |
| Cutting diameter tolerance class (TCDC) | h10 |
| Depth of cut maximum - inch (APMX) | 0.4724 |
| Depth of cut maximum - millimeter (APMX) | 12 |
| EDP number | 641767 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 34 |
| Material | HM |
| Material application | K - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 5983500 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S804HB8.0 |
| Overall length - inch (OAL) | 2.2835 |
| Overall length - millimeter (OAL) | 58 |
| Peripheral effective cutting edge count (ZEFP) | 4 |
| Radial rake angle (GAMF) | 9 |
| Shank | Cylindrical shank DIN 6535 HB |
5983500
