Dormer E625M8 7350495 Machine Tap Yellow Shark for Low Alloy Steels Plug Style 3FL M8 x 1.25 mm
- Write a review
$25.45
Basic StandardDIN/ANSIClamping Length - millimeter (LSC)10Clamping width - inch0.236CoatingTiAlN/TopCoating property (CTP)1Connection diameter - inch (DCON MS)0.318Connection diameter - millimeter (DCON MS)8.08EDP number7350495Flute count (NOF)3Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationN - Non-ferrous metals, P - Steel and cast steelMID number7350495Ordering code ANSIE625M8Overall length - inch (OAL)3.5433Overall length - millimeter (OAL)0.318Premachined hole diameter - imperial (PHD)HPremachined hole diameter - inch (PHD)0.2677Premachined hole diameter - millimeter (PHD)6.8ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter - millimeter (TD)HThread diameter size (TDZ)8Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0492Thread pitch - millimeter (TP)1.25Threading length - inch (THL)0.7087Threading length - millimeter (THL)18Tolerance limitD5Usable length (ULDR)2.5Usable Length - inch (LU)1.378Usable Length - millimeter (LU)35
Specifications
| Basic Standard | DIN/ANSI |
| Clamping Length - millimeter (LSC) | 10 |
| Clamping width - inch | 0.236 |
| Coating | TiAlN/Top |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.318 |
| Connection diameter - millimeter (DCON MS) | 8.08 |
| EDP number | 7350495 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 7350495 |
| Ordering code ANSI | E625M8 |
| Overall length - inch (OAL) | 3.5433 |
| Overall length - millimeter (OAL) | 0.318 |
| Premachined hole diameter - imperial (PHD) | H |
| Premachined hole diameter - inch (PHD) | 0.2677 |
| Premachined hole diameter - millimeter (PHD) | 6.8 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter - millimeter (TD) | H |
| Thread diameter size (TDZ) | 8 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0492 |
| Thread pitch - millimeter (TP) | 1.25 |
| Threading length - inch (THL) | 0.7087 |
| Threading length - millimeter (THL) | 18 |
| Tolerance limit | D5 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 1.378 |
| Usable Length - millimeter (LU) | 35 |
7350495