Dormer J2056.5X1.25 6821297 Thread Mill Spiral Flute 10° Oil Feed M8 X 1.25 MM
- Write a review
$241.63
Basic StandardDORMERCoatingAlcrona ProCoating property (CTP)1Connection diameter - inch (DCON MS)0.3937Connection diameter - millimeter (DCON MS)10Coolant exit style (CXSC)axial concentric exitCoolant supply property (CSP)1Cutting diameter - inch (DC)0.2559Cutting diameter - millimeter (DC)6.5Depth of cut maximum - millimeter (APMX)17.5EDP number46821297Flute count (NOF)3Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)10Hand (Cutting direction)RightMaterialHMMID number6821297Ordering code ANSIJ2056.5X1.25Overall length - inch (OAL)2.8346Overall length - millimeter (OAL)72ShankCylindrical shank DIN 6535 HBThread diameter size (TDZ)M8Thread form (THFT)M - Metric coarseThread pitch - millimeter (TP)1.25Usable length (ULDR)2Usable Length - millimeter (LU)19.1
Specifications
| Basic Standard | DORMER |
| Coating | Alcrona Pro |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.3937 |
| Connection diameter - millimeter (DCON MS) | 10 |
| Coolant exit style (CXSC) | axial concentric exit |
| Coolant supply property (CSP) | 1 |
| Cutting diameter - inch (DC) | 0.2559 |
| Cutting diameter - millimeter (DC) | 6.5 |
| Depth of cut maximum - millimeter (APMX) | 17.5 |
| EDP number | 46821297 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 10 |
| Hand (Cutting direction) | Right |
| Material | HM |
| MID number | 6821297 |
| Ordering code ANSI | J2056.5X1.25 |
| Overall length - inch (OAL) | 2.8346 |
| Overall length - millimeter (OAL) | 72 |
| Shank | Cylindrical shank DIN 6535 HB |
| Thread diameter size (TDZ) | M8 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - millimeter (TP) | 1.25 |
| Usable length (ULDR) | 2 |
| Usable Length - millimeter (LU) | 19.1 |
6821297