Dormer E90510-32 7812137 DIN-ANSI UNF Machine Tap Black Shark for Hard Alloys Spiral Flute
- Write a review
$29.22
Basic StandardDIN/ANSIClamping width - inch0.189CoatingTiAlN/TopCoating property (CTP)1Connection diameter - inch (DCON MS)0.255Connection diameter - millimeter (DCON MS)6.48Coolant supply property (CSP)N21EDP number7812137Flute count (NOF)3Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)15Hand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steel, S - High-temperature alloysMID number7812137Ordering code ANSIE90510-32Overall length - inch (OAL)3.15Overall length - millimeter (OAL)0.255Premachined hole diameter - imperial (PHD)N21Premachined hole diameter - inch (PHD)0.1614Premachined hole diameter - millimeter (PHD)15Tap chamfer style (TCS)C 2 - 3Thread diameter - millimeter (TD)4.1Thread diameter size (TDZ)10Thread form (THFT)UNF - Unified FineThread pitch - inch (TP)1.2598Thread pitch - millimeter (TP)32Threading length - inch (THL)0.669Threads per inch (TPI)32Tolerance limitH3Usable length (ULDR)1.5Usable Length - inch (LU)1.024
Specifications
| Basic Standard | DIN/ANSI |
| Clamping width - inch | 0.189 |
| Coating | TiAlN/Top |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.255 |
| Connection diameter - millimeter (DCON MS) | 6.48 |
| Coolant supply property (CSP) | N21 |
| EDP number | 7812137 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 15 |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel, S - High-temperature alloys |
| MID number | 7812137 |
| Ordering code ANSI | E90510-32 |
| Overall length - inch (OAL) | 3.15 |
| Overall length - millimeter (OAL) | 0.255 |
| Premachined hole diameter - imperial (PHD) | N21 |
| Premachined hole diameter - inch (PHD) | 0.1614 |
| Premachined hole diameter - millimeter (PHD) | 15 |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - millimeter (TD) | 4.1 |
| Thread diameter size (TDZ) | 10 |
| Thread form (THFT) | UNF - Unified Fine |
| Thread pitch - inch (TP) | 1.2598 |
| Thread pitch - millimeter (TP) | 32 |
| Threading length - inch (THL) | 0.669 |
| Threads per inch (TPI) | 32 |
| Tolerance limit | H3 |
| Usable length (ULDR) | 1.5 |
| Usable Length - inch (LU) | 1.024 |
7812137