Dormer A221N6 5969104 118° Centre Drill - 60° Short ANSI N6
- Write a review
$20.61
ApplicationAngleIcon_DICT_SELCenter drilling 60°Basic StandardANSICoatingBrightConnection diameter - fractional inch (DCON MS)1/2Connection diameter - inch (DCON MS)0.5Connection diameter - millimeter (DCON MS)12.7Cutting diameter - fractional inch (DC)7/32"Cutting diameter - inch (DC)0.2188Cutting diameter - millimeter (DC)5.56EDP number241912Hand (Cutting direction)RightInternal designation number6Length chip flute - fractional inch (LCF)7/32MaterialHSS-EMaterial applicationK - Cast iron, P - Steel and cast steelMID number5969104Ordering code ANSIA221N6Overall length - fractional inch (OAL)3Overall length - millimeter (OAL)76.2Point Angle (SIG)118ShankCylindrical shankStep included angle (STA)60Usable length (ULDR)1.5
Specifications
| ApplicationAngleIcon_DICT_SEL | Center drilling 60° |
| Basic Standard | ANSI |
| Coating | Bright |
| Connection diameter - fractional inch (DCON MS) | 1/2 |
| Connection diameter - inch (DCON MS) | 0.5 |
| Connection diameter - millimeter (DCON MS) | 12.7 |
| Cutting diameter - fractional inch (DC) | 7/32" |
| Cutting diameter - inch (DC) | 0.2188 |
| Cutting diameter - millimeter (DC) | 5.56 |
| EDP number | 241912 |
| Hand (Cutting direction) | Right |
| Internal designation number | 6 |
| Length chip flute - fractional inch (LCF) | 7/32 |
| Material | HSS-E |
| Material application | K - Cast iron, P - Steel and cast steel |
| MID number | 5969104 |
| Ordering code ANSI | A221N6 |
| Overall length - fractional inch (OAL) | 3 |
| Overall length - millimeter (OAL) | 76.2 |
| Point Angle (SIG) | 118 |
| Shank | Cylindrical shank |
| Step included angle (STA) | 60 |
| Usable length (ULDR) | 1.5 |
5969104
