- New
Dormer E255M16 6554489 Machine Tap Spiral Point Red Shark 3FL M16 x 2.00 mm
- Write a review
$59.42
Basic StandardDIN 376Clamping Length - millimeter (LSC)12Clamping width - fractional inch (WSC)9Clamping width - inch0.3543CoatingBrightConnection diameter - inch (DCON MS)12EDP number46554489Flute count (NOF)3Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number6554489Ordering code ANSIE255M16Overall length - inch (OAL)4.3307Overall length - millimeter (OAL)110Premachined hole diameter - inch (PHD)0.5512Premachined hole diameter - millimeter (PHD)14ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter size (TDZ)16Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0787Thread pitch - millimeter (TP)2Threading length - inch (THL)0.9843Threading length - millimeter (THL)25Usable length (ULDR)2.5
Specifications
| Basic Standard | DIN 376 |
| Clamping Length - millimeter (LSC) | 12 |
| Clamping width - fractional inch (WSC) | 9 |
| Clamping width - inch | 0.3543 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 12 |
| EDP number | 46554489 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 6554489 |
| Ordering code ANSI | E255M16 |
| Overall length - inch (OAL) | 4.3307 |
| Overall length - millimeter (OAL) | 110 |
| Premachined hole diameter - inch (PHD) | 0.5512 |
| Premachined hole diameter - millimeter (PHD) | 14 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter size (TDZ) | 16 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0787 |
| Thread pitch - millimeter (TP) | 2 |
| Threading length - inch (THL) | 0.9843 |
| Threading length - millimeter (THL) | 25 |
| Usable length (ULDR) | 2.5 |
6554489
