Dormer E545BA2 5976706 BA Machine Tap Spiral Point 3FL No.2
- Write a review
$16.58
Basic StandardISO 529Clamping Length - millimeter (LSC)7Clamping width - fractional inch (WSC)4Clamping width - inch0.1575CoatingSteam TemperedConnection diameter - inch (DCON MS)5Coolant supply property (CSP)4.7EDP number203941Flute count (NOF)3Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSSMaterial applicationM - Stainless steel, P - Steel and cast steelMID number5976706Ordering code ANSIE545BA2Overall length - inch (OAL)2.2835Overall length - millimeter (OAL)58Premachined hole diameter - inch (PHD)0.1575Premachined hole diameter - millimeter (PHD)4ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter - inch (TD)0.185Thread diameter - millimeter (TD)4.7Thread diameter size (TDZ)BA 2Thread form (THFT)BA - British associationThread pitch - inch (TP)0.0319Thread pitch - millimeter (TP)0.81Threading length - inch (THL)0.4724Threading length - millimeter (THL)12Usable length (ULDR)2.5Usable Length - inch (LU)0.7874Usable Length - millimeter (LU)20
Specifications
| Basic Standard | ISO 529 |
| Clamping Length - millimeter (LSC) | 7 |
| Clamping width - fractional inch (WSC) | 4 |
| Clamping width - inch | 0.1575 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 5 |
| Coolant supply property (CSP) | 4.7 |
| EDP number | 203941 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Material application | M - Stainless steel, P - Steel and cast steel |
| MID number | 5976706 |
| Ordering code ANSI | E545BA2 |
| Overall length - inch (OAL) | 2.2835 |
| Overall length - millimeter (OAL) | 58 |
| Premachined hole diameter - inch (PHD) | 0.1575 |
| Premachined hole diameter - millimeter (PHD) | 4 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter - inch (TD) | 0.185 |
| Thread diameter - millimeter (TD) | 4.7 |
| Thread diameter size (TDZ) | BA 2 |
| Thread form (THFT) | BA - British association |
| Thread pitch - inch (TP) | 0.0319 |
| Thread pitch - millimeter (TP) | 0.81 |
| Threading length - inch (THL) | 0.4724 |
| Threading length - millimeter (THL) | 12 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 0.7874 |
| Usable Length - millimeter (LU) | 20 |
5976706
