Dormer S803HA3.8 5983402 Slot Drill N 6527 K 3.80 mm
- Write a review
$47.12
Basic StandardDIN 6527 KCoatingAlCrNCoating property (CTP)1Connection diameter - inch (DCON MS)0.2362Connection diameter - millimeter (DCON MS)6Connection diameter tolerance machine side (TCDCONMS)h6Corner chamfer width - millimeter (CHW)0.08Cut lengthExtra shortCutting diameter - inch (DC)0.1496Cutting diameter - millimeter (DC)3.8Cutting diameter tolerance class (TCDC)h9Depth of cut maximum - inch (APMX)0.1969Depth of cut maximum - millimeter (APMX)5EDP number641064Flute count (NOF)3Flute helix angle (FHA)28MaterialHMMaterial applicationK - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steelMID number5983402Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS803HA3.8Overall length - inch (OAL)2.126Overall length - millimeter (OAL)54Peripheral effective cutting edge count (ZEFP)3Radial rake angle (GAMF)9ShankCylindrical shank DIN 6535 HA
Specifications
| Basic Standard | DIN 6527 K |
| Coating | AlCrN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.2362 |
| Connection diameter - millimeter (DCON MS) | 6 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Corner chamfer width - millimeter (CHW) | 0.08 |
| Cut length | Extra short |
| Cutting diameter - inch (DC) | 0.1496 |
| Cutting diameter - millimeter (DC) | 3.8 |
| Cutting diameter tolerance class (TCDC) | h9 |
| Depth of cut maximum - inch (APMX) | 0.1969 |
| Depth of cut maximum - millimeter (APMX) | 5 |
| EDP number | 641064 |
| Flute count (NOF) | 3 |
| Flute helix angle (FHA) | 28 |
| Material | HM |
| Material application | K - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 5983402 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S803HA3.8 |
| Overall length - inch (OAL) | 2.126 |
| Overall length - millimeter (OAL) | 54 |
| Peripheral effective cutting edge count (ZEFP) | 3 |
| Radial rake angle (GAMF) | 9 |
| Shank | Cylindrical shank DIN 6535 HA |
5983402
