Dormer C24711.0 5984250 End Mill 11.00 mm
- Write a review
$51.13
Basic StandardDIN 844 KCoatingBrightConnection diameter - inch (DCON MS)0.4724Connection diameter - millimeter (DCON MS)12Cut lengthShortCutting diameter - inch (DC)0.4331Cutting diameter - millimeter (DC)11Cutting diameter tolerance class (TCDC)k10Depth of cut maximum - inch (APMX)0.8661Depth of cut maximum - millimeter (APMX)22EDP number354599Flute count (NOF)4Flute helix angle (FHA)30MaterialHSS-E-PMMaterial applicationN - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloysMID number5984250Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIC24711.0Overall length - inch (OAL)3.1102Overall length - millimeter (OAL)79Peripheral effective cutting edge count (ZEFP)4Radial rake angle (GAMF)12ShankWeldon shank DIN 1835B
Specifications
| Basic Standard | DIN 844 K |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.4724 |
| Connection diameter - millimeter (DCON MS) | 12 |
| Cut length | Short |
| Cutting diameter - inch (DC) | 0.4331 |
| Cutting diameter - millimeter (DC) | 11 |
| Cutting diameter tolerance class (TCDC) | k10 |
| Depth of cut maximum - inch (APMX) | 0.8661 |
| Depth of cut maximum - millimeter (APMX) | 22 |
| EDP number | 354599 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 30 |
| Material | HSS-E-PM |
| Material application | N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 5984250 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | C24711.0 |
| Overall length - inch (OAL) | 3.1102 |
| Overall length - millimeter (OAL) | 79 |
| Peripheral effective cutting edge count (ZEFP) | 4 |
| Radial rake angle (GAMF) | 12 |
| Shank | Weldon shank DIN 1835B |
5984250
