Dormer EP01M2 5973473 Machine Tap Spiral Point 2FL M2 x 0.40 mm
- Write a review
$24.08
Basic StandardDIN 371Clamping Length - millimeter (LSC)5Clamping width - fractional inch (WSC)2.1Clamping width - inch0.0827CoatingSteam TemperedConnection diameter - inch (DCON MS)2.8EDP number137253Flute count (NOF)2Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number5973473Ordering code ANSIEP01M2Overall length - inch (OAL)1.9685Overall length - millimeter (OAL)50Premachined hole diameter - inch (PHD)0.063Premachined hole diameter - millimeter (PHD)1.6ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter size (TDZ)2Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0157Thread pitch - millimeter (TP)0.4Threading length - inch (THL)0.2362Threading length - millimeter (THL)6Tolerance limitD3Usable length (ULDR)2.5Usable Length - inch (LU)0.3543Usable Length - millimeter (LU)9
Specifications
| Basic Standard | DIN 371 |
| Clamping Length - millimeter (LSC) | 5 |
| Clamping width - fractional inch (WSC) | 2.1 |
| Clamping width - inch | 0.0827 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 2.8 |
| EDP number | 137253 |
| Flute count (NOF) | 2 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 5973473 |
| Ordering code ANSI | EP01M2 |
| Overall length - inch (OAL) | 1.9685 |
| Overall length - millimeter (OAL) | 50 |
| Premachined hole diameter - inch (PHD) | 0.063 |
| Premachined hole diameter - millimeter (PHD) | 1.6 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter size (TDZ) | 2 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0157 |
| Thread pitch - millimeter (TP) | 0.4 |
| Threading length - inch (THL) | 0.2362 |
| Threading length - millimeter (THL) | 6 |
| Tolerance limit | D3 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 0.3543 |
| Usable Length - millimeter (LU) | 9 |
5973473
