Dormer EP10M26X1.5 5973496 Machine Tap Spiral Point 4FL M26 x 1.50 mm
- Write a review
$154.85
Basic StandardDIN 374Clamping Length - millimeter (LSC)17Clamping width - fractional inch (WSC)14.5Clamping width - inch0.5709CoatingBrightConnection diameter - inch (DCON MS)18EDP number137581Flute count (NOF)4Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationN - Non-ferrous metals, P - Steel and cast steelMID number5973496Ordering code ANSIEP10M26X1.5Overall length - inch (OAL)5.5118Overall length - millimeter (OAL)140Premachined hole diameter - inch (PHD)0.9646Premachined hole diameter - millimeter (PHD)24.5ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter size (TDZ)26Thread form (THFT)MF - Metric fineThread pitch - inch (TP)0.0591Thread pitch - millimeter (TP)1.5Threading length - inch (THL)1.1024Threading length - millimeter (THL)28Tolerance limitD8Usable length (ULDR)2.5
Specifications
| Basic Standard | DIN 374 |
| Clamping Length - millimeter (LSC) | 17 |
| Clamping width - fractional inch (WSC) | 14.5 |
| Clamping width - inch | 0.5709 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 18 |
| EDP number | 137581 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 5973496 |
| Ordering code ANSI | EP10M26X1.5 |
| Overall length - inch (OAL) | 5.5118 |
| Overall length - millimeter (OAL) | 140 |
| Premachined hole diameter - inch (PHD) | 0.9646 |
| Premachined hole diameter - millimeter (PHD) | 24.5 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter size (TDZ) | 26 |
| Thread form (THFT) | MF - Metric fine |
| Thread pitch - inch (TP) | 0.0591 |
| Thread pitch - millimeter (TP) | 1.5 |
| Threading length - inch (THL) | 1.1024 |
| Threading length - millimeter (THL) | 28 |
| Tolerance limit | D8 |
| Usable length (ULDR) | 2.5 |
5973496
