Dormer E0335/8 5973942 UNF Machine Tap Spiral Flute 45° 4FL 5/8 inch x 18
- Write a review
$96.00
Basic StandardISO 529Clamping Length - millimeter (LSC)13Clamping width - inch0.3937Clamping width - millimeter (WSC)15.875CoatingSteam TemperedConnection diameter - inch (DCON MS)12.5Connection diameter - millimeter (DCON MS)10EDP number570166Flute count (NOF)4Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)45Hand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number5973942Ordering code ANSIE0335/8Overall length - inch (OAL)4.0157Overall length - millimeter (OAL)102Premachined hole diameter - inch (PHD)0.5709Premachined hole diameter - millimeter (PHD)45ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter - inch (TD)0.625Thread diameter - millimeter (TD)14.5Thread diameter size (TDZ)5/8Thread form (THFT)UNF - Unified FineThreading length - inch (THL)0.9449Threading length - millimeter (THL)24Threads per inch (TPI)18Tolerance limitH5Usable length (ULDR)2.5
Specifications
| Basic Standard | ISO 529 |
| Clamping Length - millimeter (LSC) | 13 |
| Clamping width - inch | 0.3937 |
| Clamping width - millimeter (WSC) | 15.875 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 12.5 |
| Connection diameter - millimeter (DCON MS) | 10 |
| EDP number | 570166 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 45 |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 5973942 |
| Ordering code ANSI | E0335/8 |
| Overall length - inch (OAL) | 4.0157 |
| Overall length - millimeter (OAL) | 102 |
| Premachined hole diameter - inch (PHD) | 0.5709 |
| Premachined hole diameter - millimeter (PHD) | 45 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - inch (TD) | 0.625 |
| Thread diameter - millimeter (TD) | 14.5 |
| Thread diameter size (TDZ) | 5/8 |
| Thread form (THFT) | UNF - Unified Fine |
| Threading length - inch (THL) | 0.9449 |
| Threading length - millimeter (THL) | 24 |
| Threads per inch (TPI) | 18 |
| Tolerance limit | H5 |
| Usable length (ULDR) | 2.5 |
5973942
