5ATS13.5 026135 Taper Shank Drill 13.50 mm
- Write a review
$67.38
ApplicationAngleIcon_DICT_SELDrill point 118°Basic StandardDIN 345CoatingSteam TemperedConnection (shank) descriptionMorse Taper ShankConnection size code machine side (CZC MS)1Cutting diameter - inch (DC)0.5315Cutting diameter - millimeter (DC)13.5Drill LengthJobberHand (Cutting direction)RightLength chip flute - millimeter (LCF)108Length chip flute - inch (LCF)4.252MaterialHSSOverall length - millimeter (OAL)189Overall length - inch (OAL)7.4409Point Angle (SIG)118Spiral formStandard SpiralSurface treatementSteam TemperedUsable length (ULDR)4
Specifications
| ApplicationAngleIcon_DICT_SEL | Drill point 118° |
| Basic Standard | DIN 345 |
| Coating | Steam Tempered |
| Connection (shank) description | Morse Taper Shank |
| Connection size code machine side (CZC MS) | 1 |
| Cutting diameter - inch (DC) | 0.5315 |
| Cutting diameter - millimeter (DC) | 13.5 |
| Drill Length | Jobber |
| Hand (Cutting direction) | Right |
| Length chip flute - millimeter (LCF) | 108 |
| Length chip flute - inch (LCF) | 4.252 |
| Material | HSS |
| Overall length - millimeter (OAL) | 189 |
| Overall length - inch (OAL) | 7.4409 |
| Point Angle (SIG) | 118 |
| Spiral form | Standard Spiral |
| Surface treatement | Steam Tempered |
| Usable length (ULDR) | 4 |
5ATS13.5
