Dormer E006M6 5973778 Machine Tap Spiral Point M6 x 1.00 mm
- Write a review
$13.77
Basic StandardANSIClamping width - inch0.191CoatingSteam TemperedConnection diameter - inch (DCON MS)0.255Connection diameter - millimeter (DCON MS)6.48EDP number580493Flute count (NOF)2Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number5973778Ordering code ANSIE006M6Overall length - fractional inch (OAL)2.1/2Overall length - inch (OAL)2.5Overall length - millimeter (OAL)0.255Premachined hole diameter - imperial (PHD)N9Premachined hole diameter - inch (PHD)0.1969Premachined hole diameter - millimeter (PHD)5ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter - millimeter (TD)N9Thread diameter size (TDZ)6Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0394Thread pitch - millimeter (TP)1Threading length - inch (THL)0.5075Tolerance limitD5Usable length (ULDR)2.5Usable Length - inch (LU)1.0073
Specifications
| Basic Standard | ANSI |
| Clamping width - inch | 0.191 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 0.255 |
| Connection diameter - millimeter (DCON MS) | 6.48 |
| EDP number | 580493 |
| Flute count (NOF) | 2 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 5973778 |
| Ordering code ANSI | E006M6 |
| Overall length - fractional inch (OAL) | 2.1/2 |
| Overall length - inch (OAL) | 2.5 |
| Overall length - millimeter (OAL) | 0.255 |
| Premachined hole diameter - imperial (PHD) | N9 |
| Premachined hole diameter - inch (PHD) | 0.1969 |
| Premachined hole diameter - millimeter (PHD) | 5 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter - millimeter (TD) | N9 |
| Thread diameter size (TDZ) | 6 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0394 |
| Thread pitch - millimeter (TP) | 1 |
| Threading length - inch (THL) | 0.5075 |
| Tolerance limit | D5 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 1.0073 |
5973778
