Dormer EP214-40 5973914 UNC Machine Tap Spiral Point 3FL No.4 x 40
- Write a review
$30.41
Basic StandardDIN 2184-1Clamping Length - millimeter (LSC)6Clamping width - fractional inch (WSC)2.7Clamping width - inch0.1063CoatingSteam TemperedConnection diameter - inch (DCON MS)3.5Coolant supply property (CSP)2.845EDP number138175Flute count (NOF)3Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number5973914Ordering code ANSIEP214-40Overall length - inch (OAL)2.2047Overall length - millimeter (OAL)56Premachined hole diameter - inch (PHD)0.0925Premachined hole diameter - millimeter (PHD)2.35ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter - inch (TD)0.112Thread diameter - millimeter (TD)2.845Thread diameter size (TDZ)4Thread form (THFT)UNC - Unified CoarseThreading length - inch (THL)0.3543Threading length - millimeter (THL)9Threads per inch (TPI)40Tolerance limitH2Usable length (ULDR)2.5Usable Length - inch (LU)0.7087Usable Length - millimeter (LU)18
Specifications
| Basic Standard | DIN 2184-1 |
| Clamping Length - millimeter (LSC) | 6 |
| Clamping width - fractional inch (WSC) | 2.7 |
| Clamping width - inch | 0.1063 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 3.5 |
| Coolant supply property (CSP) | 2.845 |
| EDP number | 138175 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 5973914 |
| Ordering code ANSI | EP214-40 |
| Overall length - inch (OAL) | 2.2047 |
| Overall length - millimeter (OAL) | 56 |
| Premachined hole diameter - inch (PHD) | 0.0925 |
| Premachined hole diameter - millimeter (PHD) | 2.35 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter - inch (TD) | 0.112 |
| Thread diameter - millimeter (TD) | 2.845 |
| Thread diameter size (TDZ) | 4 |
| Thread form (THFT) | UNC - Unified Coarse |
| Threading length - inch (THL) | 0.3543 |
| Threading length - millimeter (THL) | 9 |
| Threads per inch (TPI) | 40 |
| Tolerance limit | H2 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 0.7087 |
| Usable Length - millimeter (LU) | 18 |
5973914
