Dormer E293M10 6305746 M Machine Forming Tap DIN 2174 5FL M10 x 1.50 mm
- Write a review
$60.11
Basic StandardDIN 2174Clamping Length - millimeter (LSC)11Clamping width - inch0.315Clamping width - millimeter (WSC)8CoatingTiNCoating property (CTP)1Connection diameter - inch (DCON MS)0.3937Connection diameter - millimeter (DCON MS)10EDP number46305746Flute count (NOF)5Flute Geometry (FDC)Fluteless Geometry (Threadforming)Hand (Cutting direction)RightMaterialHSS-EMaterial applicationM - Stainless steel, N - Non-ferrous metals, P - Steel and cast steelMID number6305746Ordering code ANSIE293M10Overall length - inch (OAL)3.937Overall length - millimeter (OAL)100Premachined hole diameter - inch (PHD)0.3661Premachined hole diameter - millimeter (PHD)9.3ShankCylindrical shank with SquareTap chamfer style (TCS)E 1.5 - 2Thread diameter size (TDZ)10Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0591Thread pitch - millimeter (TP)1.5Threading length - inch (THL)0.7874Threading length - millimeter (THL)20Usable length (ULDR)3Usable Length - inch (LU)1.5354Usable Length - millimeter (LU)39
Specifications
| Basic Standard | DIN 2174 |
| Clamping Length - millimeter (LSC) | 11 |
| Clamping width - inch | 0.315 |
| Clamping width - millimeter (WSC) | 8 |
| Coating | TiN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.3937 |
| Connection diameter - millimeter (DCON MS) | 10 |
| EDP number | 46305746 |
| Flute count (NOF) | 5 |
| Flute Geometry (FDC) | Fluteless Geometry (Threadforming) |
| Hand (Cutting direction) | Right |
| Material | HSS-E |
| Material application | M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 6305746 |
| Ordering code ANSI | E293M10 |
| Overall length - inch (OAL) | 3.937 |
| Overall length - millimeter (OAL) | 100 |
| Premachined hole diameter - inch (PHD) | 0.3661 |
| Premachined hole diameter - millimeter (PHD) | 9.3 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | E 1.5 - 2 |
| Thread diameter size (TDZ) | 10 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0591 |
| Thread pitch - millimeter (TP) | 1.5 |
| Threading length - inch (THL) | 0.7874 |
| Threading length - millimeter (THL) | 20 |
| Usable length (ULDR) | 3 |
| Usable Length - inch (LU) | 1.5354 |
| Usable Length - millimeter (LU) | 39 |
6305746
