- New
Whitney Tool 10050 Keyseat Milling Cutter, Style 101 #404 (3), 1/2" Cut Diameter, 1/8" Cut Width, Stagger ToothKeyseat Milling C
- Write a review
$32.45
Specifications
| Auxiliary lip | Yes |
| Design | CRWA1 |
| Housing bore diameter | 46.43 mm, 1.828 in |
| Maximum operating temperature | 100.0 °C, 212.0 °F |
| Maximum operating temperature (°F) | 100.0 °C, 212.0 |
| Minimum operating temperature | -40.0 °C, -40.0 °F |
| Minimum operating temperature (°F) | -40.0 °C, -40.0 |
| Permissible circumferential speed | 5.09 m/s |
| Rotational speed | 3840.0 r/min |
| Seal width | 6.35 mm, 0.25 in |
| Sealing lip material | Nitrile rubber (NBR) |
| Shaft diameter | 25.4 mm, 1.0 in |
| Type of outside diameter | Metal-cased with sealant coating on the outside diameter |
| Unit system | Inch |
10050
