Whitney Tool 02367 HSS Tapered Ball End Mill, 25 degree, 5/16" Tip Diameter, 1.5" Length of Cut, 1" Shank Diameter, 4" Overall L
- Write a review
$196.91
CoatingNo CoatingDegree Per Side25°EDP No2367Length of Cut1-1/2"MaterialHigh Speed SteelOverall Length4"Overall Length mm101.6Shank Dia. Tolerance+0"/-0.0005"Shank Diameter1"Tip Diameter5/16"TypeBall EndWTC No2367
Specifications
| Belt thickness (in) | 1/16-1/8 |
| Belt Thickness (in.) | 11/32-25/64 |
| Belt Thickness (mm) | 9.0-10.0 |
| Belt thickness (mm) | 9.0-10.0 |
| Belt width (in) | 60 |
| Cards or Strips per Box | 12 |
| Cards or strips per box | 12 |
| Fastener Material | Stainless (Type 430) |
| Fastener material | Steel |
| Hinge pin diameter (in) | 0.080 |
| Hinge pin included | Yes |
| Hinge Pin Included | No |
| Hinge pin material | Steel spring wire |
| Hook Size | 7 |
| Hook size | 7 |
| Hook Style | Carded |
| Hook style | Carded |
| Hooks Per Card Or Strip | 84 |
| Hooks per card or strip | 84 |
| Lacing in./Box | 144 |
| Lacing in/box | 144 |
| Mechanical fastener rating (PIW) | 100 |
| Min pulley diameter (in) | 2 |
| Minimum pulley diameter (in) | 7 |
| Minimum Pulley Diameter (in.) | 7 |
| Minimum Pulley Diameter (mm) | 175 |
| Minimum pulley diameter (mm) | 175 |
| Package configuration | r |
| Required pin diameter (in) | 0.156 |
| Required Pin Diameter (in.) | 0.156 |
| Required Pin Diameter (mm) | 4.0 |
| Required pin diameter (mm) | 4.0 |
| Strip length (in) | 12 |
| Strip Length (in.) | 12 |
| Strip Length (mm) | 300 |
| Strip length (mm) | 300 |
| Wire diameter (in) | 0.054 |
| Wire Diameter (in.) | 0.054 |
| Wire Diameter (mm) | 1.37 |
| Wire diameter (mm) | 1.37 |
02367