Whitney Tool 15655 Deep Slotting Cutter With Side Teeth, 5 degree Rake for Ferrous Material, 1-1/4" Cut Diameter, 1/4" Cut Width
- Write a review
$144.85
CoatingNo CoatingCut Diameter, Inch1-1/4"Cut Diameter, Metric31.75Cut Width1/4"EDP No15655MaterialHigh Speed SteelNeck Diameter0.375Number of Teeth14OD Tolerance0.75Overall Length2-1/4"Shank Dia. Tolerance0Shank Diameter1/2"Shank Length2Shank TypeStraightStyle5° Rake for Ferrous MaterialTooth ConfigurationStraightTypeDeep Slotting CuttersWidth Tolerance0WTC No15655
Specifications
| Auxiliary lip | No |
| Design | CRW1 |
| Housing bore diameter | 63.551 mm, 2.502 in |
| Maximum operating temperature | 100.0 °C, 212.0 °F |
| Maximum operating temperature (°F) | 100.0 °C, 212.0 |
| Minimum operating temperature | -40.0 °C, -40.0 °F |
| Minimum operating temperature (°F) | -40.0 °C, -40.0 |
| Permissible circumferential speed | 6.9 m/s |
| Rotational speed | 3300.0 r/min |
| Seal width | 7.95 mm, 0.313 in |
| Sealing lip material | Nitrile rubber (NBR) |
| Shaft diameter | 39.7 mm, 1.563 in |
| Type of outside diameter | Metal-cased with sealant coating on the outside diameter |
| Unit system | Inch |
15655
