Dormer E6533/4 5978399 5978399 NPT Combi Taps Spiral Flute 27° 3/4 inch x 14
- Write a review
$159.64
Basic StandardANSIClamping width - fractional inch (WSC)0.906Clamping width - inch0.679CoatingBrightCoating property (CTP)2Connection diameter - inch (DCON MS)4.9/16Connection diameter - millimeter (DCON MS)23.01EDP number297292Flute count (NOF)27Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)27Hand (Cutting direction)RightMaterialHSSMaterial applicationP - Steel and cast steelMID number5978399Ordering code ANSIE6533/4Overall length - fractional inch (OAL)4.9/16Overall length - inch (OAL)4.5625Overall length - millimeter (OAL)1.3/8ShankCylindrical shank with SquareThread diameter - millimeter (TD)0.9055Thread diameter size (TDZ)3/4Thread form (THFT)NPT - National taper pipeThreads per inch (TPI)14Usable length (ULDR)1.5Usable Length - fractional inch (LU)1.3/8
Specifications
| Basic Standard | ANSI |
| Clamping width - fractional inch (WSC) | 0.906 |
| Clamping width - inch | 0.679 |
| Coating | Bright |
| Coating property (CTP) | 2 |
| Connection diameter - inch (DCON MS) | 4.9/16 |
| Connection diameter - millimeter (DCON MS) | 23.01 |
| EDP number | 297292 |
| Flute count (NOF) | 27 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 27 |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Material application | P - Steel and cast steel |
| MID number | 5978399 |
| Ordering code ANSI | E6533/4 |
| Overall length - fractional inch (OAL) | 4.9/16 |
| Overall length - inch (OAL) | 4.5625 |
| Overall length - millimeter (OAL) | 1.3/8 |
| Shank | Cylindrical shank with Square |
| Thread diameter - millimeter (TD) | 0.9055 |
| Thread diameter size (TDZ) | 3/4 |
| Thread form (THFT) | NPT - National taper pipe |
| Threads per inch (TPI) | 14 |
| Usable length (ULDR) | 1.5 |
| Usable Length - fractional inch (LU) | 1.3/8 |
5978399