- New
Dormer S2312.0XD3 6706486 Ball-Nosed End Mill 2.00 mm x 3.0 mm
- Write a review
$64.04
Basic StandardDORMERCoatingTiSiNCoating property (CTP)1Connection diameter - inch (DCON MS)0.1181Connection diameter - millimeter (DCON MS)3Corner radius - inch (RE)0.0394Corner radius - millimeter (RE)1Cut lengthExtra shortCutting diameter - inch (DC)0.0787Cutting diameter - millimeter (DC)2Cutting diameter tolerance class (TCDC)h9Depth of cut maximum - inch (APMX)0.1575Depth of cut maximum - millimeter (APMX)4EDP number46706486Flute count (NOF)2Flute helix angle (FHA)30MaterialHMMaterial applicationM - Stainless steel, P - Steel and cast steel, S - High-temperature alloysMID number6706486Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsNeck diameter - inch (DN)0.0748Neck diameter - millimeter (DN)1.9Ordering code ANSIS2312.0XD3Overall length - inch (OAL)2.3622Overall length - millimeter (OAL)60Peripheral effective cutting edge count (ZEFP)2Radial rake angle (GAMF)3ShankCylindrical shank DIN 6535 HAUsable Length - millimeter (LU)14
Specifications
| Basic Standard | DORMER |
| Coating | TiSiN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.1181 |
| Connection diameter - millimeter (DCON MS) | 3 |
| Corner radius - inch (RE) | 0.0394 |
| Corner radius - millimeter (RE) | 1 |
| Cut length | Extra short |
| Cutting diameter - inch (DC) | 0.0787 |
| Cutting diameter - millimeter (DC) | 2 |
| Cutting diameter tolerance class (TCDC) | h9 |
| Depth of cut maximum - inch (APMX) | 0.1575 |
| Depth of cut maximum - millimeter (APMX) | 4 |
| EDP number | 46706486 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 30 |
| Material | HM |
| Material application | M - Stainless steel, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 6706486 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Neck diameter - inch (DN) | 0.0748 |
| Neck diameter - millimeter (DN) | 1.9 |
| Ordering code ANSI | S2312.0XD3 |
| Overall length - inch (OAL) | 2.3622 |
| Overall length - millimeter (OAL) | 60 |
| Peripheral effective cutting edge count (ZEFP) | 2 |
| Radial rake angle (GAMF) | 3 |
| Shank | Cylindrical shank DIN 6535 HA |
| Usable Length - millimeter (LU) | 14 |
6706486
