Whitney Tool 01355 HSS Tapered Square End Mill, 20 degree, 5/16" Tip Diameter, 1" Length of Cut, 3/4" Shank Diameter, 3.25" Over
- Write a review
$86.89
CoatingNo CoatingDegree Per Side20°EDP No1355Length of Cut1"MaterialHigh Speed SteelOverall Length3-1/4"Overall Length mm82.55Shank Dia. Tolerance+0"/-0.0005"Shank Diameter3/4"Tip Diameter5/16"TypeSquare EndWTC No1355
Specifications
| Belt Thickness (in.) | 1/16-1/8 |
| Belt Thickness (mm) | 1.6-3.2 |
| Cards or Strips per Box | 10 |
| Fastener Material | Stainless (Type 430) |
| Hinge Pin Included | No |
| Hook Size | UX-1SP |
| Hook Style | Unibar |
| Hooks Per Card Or Strip | 188 |
| Lacing in./Box | 240 |
| Minimum Pulley Diameter (in.) | 2 |
| Minimum Pulley Diameter (mm) | 50 |
| Required Pin Diameter (in.) | 0.065 |
| Required Pin Diameter (mm) | 1.7 |
| Strip Length (in.) | 24 |
| Strip Length (mm) | 600 |
| Wire Diameter (in.) | 0.040 |
| Wire Diameter (mm) | 1.02 |
01355