Dormer S1065/8 7648494 End Mill 5/8 inch
- Write a review
$113.33
Basic StandardDORMERCoatingBrightConnection diameter - fractional inch (DCON MS)5/8Connection diameter - inch (DCON MS)0.625Connection diameter - millimeter (DCON MS)15.88Cut lengthMediumCutting diameter - fractional inch (DC)5/8Cutting diameter - inch (DC)0.625Cutting diameter - millimeter (DC)15.88Cutting diameter tolerance class (TCDC)ANSI +.000/-.002Depth of cut maximum - fractional inch (APMX)1.5/8EDP number7648494Flute count (NOF)2Flute helix angle (FHA)45MaterialHMMaterial applicationN - Non-ferrous metalsMID number7648494Mill ProfileW - Non-ferrous Cutter Type for Soft Malleable MaterialsOrdering code ANSIS1065/8Overall length - fractional inch (OAL)3.1/2Overall length - inch (OAL)3.5Overall length - millimeter (OAL)88.9Radial rake angle (GAMF)8ShankCylindrical shank
Specifications
| Basic Standard | DORMER |
| Coating | Bright |
| Connection diameter - fractional inch (DCON MS) | 5/8 |
| Connection diameter - inch (DCON MS) | 0.625 |
| Connection diameter - millimeter (DCON MS) | 15.88 |
| Cut length | Medium |
| Cutting diameter - fractional inch (DC) | 5/8 |
| Cutting diameter - inch (DC) | 0.625 |
| Cutting diameter - millimeter (DC) | 15.88 |
| Cutting diameter tolerance class (TCDC) | ANSI +.000/-.002 |
| Depth of cut maximum - fractional inch (APMX) | 1.5/8 |
| EDP number | 7648494 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 45 |
| Material | HM |
| Material application | N - Non-ferrous metals |
| MID number | 7648494 |
| Mill Profile | W - Non-ferrous Cutter Type for Soft Malleable Materials |
| Ordering code ANSI | S1065/8 |
| Overall length - fractional inch (OAL) | 3.1/2 |
| Overall length - inch (OAL) | 3.5 |
| Overall length - millimeter (OAL) | 88.9 |
| Radial rake angle (GAMF) | 8 |
| Shank | Cylindrical shank |
7648494
