Whitney Tool 01786 HSS Tapered Square End Mill, 7 degree, 1/4" Tip Diameter, 4" Length of Cut, 1" Shank Diameter, 6.5" Overall L
- Write a review
$176.85
CoatingNo CoatingDegree Per Side7°EDP No1786Length of Cut4"MaterialHigh Speed SteelOverall Length6-1/2"Overall Length mm165.1Shank Dia. Tolerance+0"/-0.0005"Shank Diameter1"Tip Diameter1/4"TypeSquare EndWTC No1786
Specifications
| Base Width (in.) | 3-1/2 |
| Base Width (mm) | 89 |
| Belt Thickness (in.) | 3/64-1/16 |
| Belt Thickness (mm) | 1.2-1.6 |
| Cards or Strips per Box | 100 |
| Fastener Material | Galvanized |
| Hinge Pin Included | Yes |
| Hinge Pin Material | Nylosteel |
| Hook Size | 25 |
| Hook Style | Carded |
| Hooks Per Card Or Strip | 46 & 47 |
| Lacing in./Box | 350 |
| Minimum Pulley Diameter (in.) | 15/16 |
| Minimum Pulley Diameter (mm) | 25 |
| Required Pin Diameter (in.) | 0.065 |
| Required Pin Diameter (mm) | 1.7 |
| Wire Diameter (in.) | 0.025 |
| Wire Diameter (mm) | 0.64 |
01786