Dormer E0234-40 5974490 UNC Machine Tap Spiral Flute 45° 3FL No.4 x 40
- Write a review
$43.34
Basic StandardISO 529Clamping Length - millimeter (LSC)5Clamping width - inch0.0984Clamping width - millimeter (WSC)2.845CoatingSteam TemperedConnection diameter - inch (DCON MS)3.15Connection diameter - millimeter (DCON MS)2.5EDP number569382Flute count (NOF)3Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)45Hand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number5974490Ordering code ANSIE0234-40Overall length - inch (OAL)1.8898Overall length - millimeter (OAL)48Premachined hole diameter - inch (PHD)0.0925Premachined hole diameter - millimeter (PHD)45ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter - inch (TD)0.112Thread diameter - millimeter (TD)2.35Thread diameter size (TDZ)4Thread form (THFT)UNC - Unified CoarseThreading length - inch (THL)0.2362Threading length - millimeter (THL)6Threads per inch (TPI)40Tolerance limitH2Usable length (ULDR)2.5Usable Length - inch (LU)0.5512Usable Length - millimeter (LU)14
Specifications
| Basic Standard | ISO 529 |
| Clamping Length - millimeter (LSC) | 5 |
| Clamping width - inch | 0.0984 |
| Clamping width - millimeter (WSC) | 2.845 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 3.15 |
| Connection diameter - millimeter (DCON MS) | 2.5 |
| EDP number | 569382 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 45 |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 5974490 |
| Ordering code ANSI | E0234-40 |
| Overall length - inch (OAL) | 1.8898 |
| Overall length - millimeter (OAL) | 48 |
| Premachined hole diameter - inch (PHD) | 0.0925 |
| Premachined hole diameter - millimeter (PHD) | 45 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - inch (TD) | 0.112 |
| Thread diameter - millimeter (TD) | 2.35 |
| Thread diameter size (TDZ) | 4 |
| Thread form (THFT) | UNC - Unified Coarse |
| Threading length - inch (THL) | 0.2362 |
| Threading length - millimeter (THL) | 6 |
| Threads per inch (TPI) | 40 |
| Tolerance limit | H2 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 0.5512 |
| Usable Length - millimeter (LU) | 14 |
5974490
