Dormer S1101/8 7648575 End Mill 2FL 1/8 inch
- Write a review
$18.19
Basic StandardDORMERCoatingBrightConnection diameter - fractional inch (DCON MS)1/8Connection diameter - inch (DCON MS)0.125Connection diameter - millimeter (DCON MS)3.18Cut lengthLongCutting diameter - fractional inch (DC)1/8Cutting diameter - inch (DC)0.125Cutting diameter - millimeter (DC)3.18Cutting diameter tolerance class (TCDC)ANSI +.000/-.002Depth of cut maximum - fractional inch (APMX)3/4EDP number7648575Flute count (NOF)2Flute helix angle (FHA)30MaterialHMMaterial applicationK - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steelMID number7648575Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS1101/8Overall length - fractional inch (OAL)2"Overall length - inch (OAL)2Overall length - millimeter (OAL)50.8Radial rake angle (GAMF)10ShankCylindrical shank
Specifications
| Basic Standard | DORMER |
| Coating | Bright |
| Connection diameter - fractional inch (DCON MS) | 1/8 |
| Connection diameter - inch (DCON MS) | 0.125 |
| Connection diameter - millimeter (DCON MS) | 3.18 |
| Cut length | Long |
| Cutting diameter - fractional inch (DC) | 1/8 |
| Cutting diameter - inch (DC) | 0.125 |
| Cutting diameter - millimeter (DC) | 3.18 |
| Cutting diameter tolerance class (TCDC) | ANSI +.000/-.002 |
| Depth of cut maximum - fractional inch (APMX) | 3/4 |
| EDP number | 7648575 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 30 |
| Material | HM |
| Material application | K - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 7648575 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S1101/8 |
| Overall length - fractional inch (OAL) | 2" |
| Overall length - inch (OAL) | 2 |
| Overall length - millimeter (OAL) | 50.8 |
| Radial rake angle (GAMF) | 10 |
| Shank | Cylindrical shank |
