Dormer R46321/64 7625027 Force M Carbide Drill 21/64 inch
- Write a review
$239.99
ApplicationAngleIcon_DICT_SELDrill point 140°Basic StandardDIN 6537 LCoatingTiAlNConnection diameter - inch (DCON MS)0.3937Connection diameter - millimeter (DCON MS)10Cooling (CSP)1Cutting diameter - fractional inch (DC)21/64Cutting diameter - inch (DC)0.3281Cutting diameter - millimeter (DC)8.33Cutting diameter tolerance class (TCDC)m7EDP number7625027Hand (Cutting direction)RightLength chip flute - inch (LCF)2.4016Length chip flute - millimeter (LCF)61Material applicationM - Stainless steel, S - High-temperature alloysMaterial code (BMC)HMMID number7625027Ordering code ANSIR46321/64Overall length - inch (OAL)4.0551Overall length - millimeter (OAL)103Point Angle (SIG)140ShankCylindrical shank DIN 6535 HAShank length - millimeter (LS)40Spiral formContinuously Thinned WebUsable length (ULDR)5
Specifications
| ApplicationAngleIcon_DICT_SEL | Drill point 140° |
| Basic Standard | DIN 6537 L |
| Coating | TiAlN |
| Connection diameter - inch (DCON MS) | 0.3937 |
| Connection diameter - millimeter (DCON MS) | 10 |
| Cooling (CSP) | 1 |
| Cutting diameter - fractional inch (DC) | 21/64 |
| Cutting diameter - inch (DC) | 0.3281 |
| Cutting diameter - millimeter (DC) | 8.33 |
| Cutting diameter tolerance class (TCDC) | m7 |
| EDP number | 7625027 |
| Hand (Cutting direction) | Right |
| Length chip flute - inch (LCF) | 2.4016 |
| Length chip flute - millimeter (LCF) | 61 |
| Material application | M - Stainless steel, S - High-temperature alloys |
| Material code (BMC) | HM |
| MID number | 7625027 |
| Ordering code ANSI | R46321/64 |
| Overall length - inch (OAL) | 4.0551 |
| Overall length - millimeter (OAL) | 103 |
| Point Angle (SIG) | 140 |
| Shank | Cylindrical shank DIN 6535 HA |
| Shank length - millimeter (LS) | 40 |
| Spiral form | Continuously Thinned Web |
| Usable length (ULDR) | 5 |
7625027
