Pramet TNGX 100404SR-F:M8330 7451059 Milling Insert - Square Shoulder
- Write a review
$17.49
Coating0.004Coating process0.001Coating property (CTP)1Cooling effectFCorner radius - inch (RE)M8330Corner radius - millimeter (RE)PVDCutting edge effective length - inch (LE)0.236Cutting edge effective length - millimeter (LE)6Cutting edge length - inch (L)0.409Cutting edge length - millimeter (L)10.39Depth of cut maximum - inch (APMX)0.197Depth of cut maximum - millimeter (APMX)5Feed maximal - millimeter0.11Feed minimal - millimeter0.03Feed_MAX_IMP_NUM0.004Feed_MIN_IMP_NUM0.1Fixing hole diameter - inch (D1)0.11Fixing hole diameter - millimeter (D1)2.8Inscribed circle diameter - inch (IC)0.236Inscribed circle diameter - millimeter (IC)6Insert cutting diameter - millimeter (CDI)4.69Insert shape code (SC)T - triangular 60° included angleInsert thickness - inch (S)0.4Insert thickness - millimeter (S)4.69Major cutting edge angle (KRINS)0.016Wiper edge length - inch (BS)Slightly negative effect on tool life
Specifications
| Coating | 0.004 |
| Coating process | 0.001 |
| Coating property (CTP) | 1 |
| Cooling effect | F |
| Corner radius - inch (RE) | M8330 |
| Corner radius - millimeter (RE) | PVD |
| Cutting edge effective length - inch (LE) | 0.236 |
| Cutting edge effective length - millimeter (LE) | 6 |
| Cutting edge length - inch (L) | 0.409 |
| Cutting edge length - millimeter (L) | 10.39 |
| Depth of cut maximum - inch (APMX) | 0.197 |
| Depth of cut maximum - millimeter (APMX) | 5 |
| Feed maximal - millimeter | 0.11 |
| Feed minimal - millimeter | 0.03 |
| Feed_MAX_IMP_NUM | 0.004 |
| Feed_MIN_IMP_NUM | 0.1 |
| Fixing hole diameter - inch (D1) | 0.11 |
| Fixing hole diameter - millimeter (D1) | 2.8 |
| Inscribed circle diameter - inch (IC) | 0.236 |
| Inscribed circle diameter - millimeter (IC) | 6 |
| Insert cutting diameter - millimeter (CDI) | 4.69 |
| Insert shape code (SC) | T - triangular 60° included angle |
| Insert thickness - inch (S) | 0.4 |
| Insert thickness - millimeter (S) | 4.69 |
| Major cutting edge angle (KRINS) | 0.016 |
| Wiper edge length - inch (BS) | Slightly negative effect on tool life |
7451059
