Dormer E771M14X1.5 7350277 Machine Tap White Shark for Cast Iron Full Bottoming 4FL M14 x 1.50 mm
- Write a review
$94.38
Basic StandardDIN/ANSIClamping Length - millimeter (LSC)13Clamping width - inch0.32Clamping width - millimeter (WSC)1CoatingTiAlN/TopCoating property (CTP)1Connection diameter - inch (DCON MS)0.429Connection diameter - millimeter (DCON MS)10.9Coolant exit style (CXSC)axial concentric exitCooling (CSP)1EDP number7350277Flute count (NOF)4Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationK - Cast iron, N - Non-ferrous metalsMID number7350277Ordering code ANSIE771M14X1.5Overall length - inch (OAL)3.937Overall length - millimeter (OAL)100Premachined hole diameter - imperial (PHD)31/64Premachined hole diameter - inch (PHD)0.4921Premachined hole diameter - millimeter (PHD)12.5ShankCylindrical shank with SquareTap chamfer style (TCS)E 1.5 - 2Thread diameter - millimeter (TD)31/64Thread diameter size (TDZ)14Thread form (THFT)MF - Metric fineThread pitch - inch (TP)0.0591Thread pitch - millimeter (TP)1.5Threading length - inch (THL)0.8268Threading length - millimeter (THL)21Tolerance limitD7Usable length (ULDR)2.5
Specifications
| Basic Standard | DIN/ANSI |
| Clamping Length - millimeter (LSC) | 13 |
| Clamping width - inch | 0.32 |
| Clamping width - millimeter (WSC) | 1 |
| Coating | TiAlN/Top |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.429 |
| Connection diameter - millimeter (DCON MS) | 10.9 |
| Coolant exit style (CXSC) | axial concentric exit |
| Cooling (CSP) | 1 |
| EDP number | 7350277 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | K - Cast iron, N - Non-ferrous metals |
| MID number | 7350277 |
| Ordering code ANSI | E771M14X1.5 |
| Overall length - inch (OAL) | 3.937 |
| Overall length - millimeter (OAL) | 100 |
| Premachined hole diameter - imperial (PHD) | 31/64 |
| Premachined hole diameter - inch (PHD) | 0.4921 |
| Premachined hole diameter - millimeter (PHD) | 12.5 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | E 1.5 - 2 |
| Thread diameter - millimeter (TD) | 31/64 |
| Thread diameter size (TDZ) | 14 |
| Thread form (THFT) | MF - Metric fine |
| Thread pitch - inch (TP) | 0.0591 |
| Thread pitch - millimeter (TP) | 1.5 |
| Threading length - inch (THL) | 0.8268 |
| Threading length - millimeter (THL) | 21 |
| Tolerance limit | D7 |
| Usable length (ULDR) | 2.5 |
7350277