R40C1/8 040808 Oxide 135° Stub Drill 1/8 inch
- Write a review
$1.76
ApplicationAngleIcon_DICT_SELDrill point 135°Basic StandardNAS907CoatingSteam TemperedCutting diameter - fractional inch (DC)1/8Cutting diameter - inch (DC)0.125Cutting diameter - millimeter (DC)3.18Hand (Cutting direction)RightLength chip flute - fractional inch (LCF)7/8Length chip flute - inch (LCF)0.875MaterialHSSOverall length - fractional inch (OAL)1.7/8Overall length - millimeter (OAL)47.63Point Angle (SIG)135ShankCylindrical shankUsable length (ULDR)2.5
Specifications
| ApplicationAngleIcon_DICT_SEL | Drill point 135° |
| Basic Standard | NAS907 |
| Coating | Steam Tempered |
| Cutting diameter - fractional inch (DC) | 1/8 |
| Cutting diameter - inch (DC) | 0.125 |
| Cutting diameter - millimeter (DC) | 3.18 |
| Hand (Cutting direction) | Right |
| Length chip flute - fractional inch (LCF) | 7/8 |
| Length chip flute - inch (LCF) | 0.875 |
| Material | HSS |
| Overall length - fractional inch (OAL) | 1.7/8 |
| Overall length - millimeter (OAL) | 47.63 |
| Point Angle (SIG) | 135 |
| Shank | Cylindrical shank |
| Usable length (ULDR) | 2.5 |
R40C1/8
