Dormer J2454.8-28 6821344 UNF Thread Mill Spiral Flute 10° Oil Feed 1/4 inch x 28
- Write a review
$150.12
Basic StandardDORMERCoatingAlcrona ProCoating property (CTP)1Connection diameter - inch (DCON MS)0.2362Connection diameter - millimeter (DCON MS)6Coolant exit style (CXSC)axial concentric exitCoolant supply property (CSP)1Cutting diameter - inch (DC)0.189Cutting diameter - millimeter (DC)4.8Depth of cut maximum - inch (APMX)0.5512Depth of cut maximum - millimeter (APMX)14EDP number46821344Flute count (NOF)3Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)10Hand (Cutting direction)RightMaterialHMMID number6821344Ordering code ANSIJ2454.8-28Overall length - inch (OAL)2.2441Overall length - millimeter (OAL)57ShankCylindrical shank DIN 6535 HBThread diameter size (TDZ)1/4Thread form (THFT)UNF - Unified FineThreads per inch (TPI)28Usable length (ULDR)2
Specifications
| Basic Standard | DORMER |
| Coating | Alcrona Pro |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.2362 |
| Connection diameter - millimeter (DCON MS) | 6 |
| Coolant exit style (CXSC) | axial concentric exit |
| Coolant supply property (CSP) | 1 |
| Cutting diameter - inch (DC) | 0.189 |
| Cutting diameter - millimeter (DC) | 4.8 |
| Depth of cut maximum - inch (APMX) | 0.5512 |
| Depth of cut maximum - millimeter (APMX) | 14 |
| EDP number | 46821344 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 10 |
| Hand (Cutting direction) | Right |
| Material | HM |
| MID number | 6821344 |
| Ordering code ANSI | J2454.8-28 |
| Overall length - inch (OAL) | 2.2441 |
| Overall length - millimeter (OAL) | 57 |
| Shank | Cylindrical shank DIN 6535 HB |
| Thread diameter size (TDZ) | 1/4 |
| Thread form (THFT) | UNF - Unified Fine |
| Threads per inch (TPI) | 28 |
| Usable length (ULDR) | 2 |
6821344