Dormer E621M8 5978295 EGMachine Tap Spiral Flute 40° 3FL M8 x 1.25 mm
- Write a review
$58.47
Basic StandardDORMER-ISOClamping Length - millimeter (LSC)11Clamping width - inch0.315Clamping width - millimeter (WSC)9.62CoatingBrightConnection diameter - inch (DCON MS)10Connection diameter - millimeter (DCON MS)8EDP number384954Flute count (NOF)3Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)40Hand (Cutting direction)RightMaterialHSSMaterial applicationP - Steel and cast steelMID number5978295Ordering code ANSIE621M8Overall length - inch (OAL)3.1496Overall length - millimeter (OAL)80Premachined hole diameter - inch (PHD)0.3307Premachined hole diameter - millimeter (PHD)40ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter - inch (TD)0.3787Thread diameter - millimeter (TD)8.4Thread diameter size (TDZ)8Thread form (THFT)EGM - EGM (Wire Insert)Thread pitch - inch (TP)0.0492Thread pitch - millimeter (TP)1.25Threading length - inch (THL)0.7087Threading length - millimeter (THL)18Usable length (ULDR)2Usable Length - inch (LU)1.3386Usable Length - millimeter (LU)34
Specifications
| Basic Standard | DORMER-ISO |
| Clamping Length - millimeter (LSC) | 11 |
| Clamping width - inch | 0.315 |
| Clamping width - millimeter (WSC) | 9.62 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 10 |
| Connection diameter - millimeter (DCON MS) | 8 |
| EDP number | 384954 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 40 |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Material application | P - Steel and cast steel |
| MID number | 5978295 |
| Ordering code ANSI | E621M8 |
| Overall length - inch (OAL) | 3.1496 |
| Overall length - millimeter (OAL) | 80 |
| Premachined hole diameter - inch (PHD) | 0.3307 |
| Premachined hole diameter - millimeter (PHD) | 40 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - inch (TD) | 0.3787 |
| Thread diameter - millimeter (TD) | 8.4 |
| Thread diameter size (TDZ) | 8 |
| Thread form (THFT) | EGM - EGM (Wire Insert) |
| Thread pitch - inch (TP) | 0.0492 |
| Thread pitch - millimeter (TP) | 1.25 |
| Threading length - inch (THL) | 0.7087 |
| Threading length - millimeter (THL) | 18 |
| Usable length (ULDR) | 2 |
| Usable Length - inch (LU) | 1.3386 |
| Usable Length - millimeter (LU) | 34 |
5978295
