Whitney Tool 15190 Keyseat Milling Cutter, Style 110, 7/8" Cut Diameter, 3/64" Cut Width, w/ TiN CoatingKeyseat Milling Cutter,
- Write a review
$65.02
CoatingNo CoatingCut Diameter, Inch7/8"Cut Diameter, Metric22.23Cut Width3/64"EDP No15190MaterialHigh Speed SteelNeck Diameter0.246Number of Teeth14OD Tolerance0.705882353Overall Length2-3/64"Shank Dia. Tolerance0Shank Diameter1/2"Shank Length2Shank TypeStraightStyleStyle 110Tooth ConfigurationStraightTypeNarrow Width Slotting CuttersWidth Tolerance0WTC No608753T
Specifications
| Auxiliary lip | No |
| Design | HM21 |
| Housing bore diameter | 66.624 mm, 2.623 in |
| Maximum operating temperature | 100.0 °C, 212.0 °F |
| Maximum operating temperature (°F) | 100.0 °C, 212.0 |
| Minimum operating temperature | -40.0 °C, -40.0 °F |
| Minimum operating temperature (°F) | -40.0 °C, -40.0 |
| Permissible circumferential speed | 8.52 m/s |
| Rotational speed | 2752.0 r/min |
| Seal width | 6.35 mm, 0.25 in |
| Sealing lip material | Nitrile rubber (NBR) |
| Shaft diameter | 59.131 mm, 2.328 in |
| Type of outside diameter | Metal-cased |
| Unit system | Inch |
15190