2ACO8.4 016484 Jobber Drill DIN 338 8.40 mm
- Write a review
$13.56
ApplicationAngleIcon_DICT_SELDrill point 135°Basic StandardDIN 338CoatingBronzeConnection (shank) descriptionCylindrical shankConnection diameter - millimeter (DCON MS)8.4Cutting diameter - inch (DC)0.3307Cutting diameter - millimeter (DC)8.4Drill LengthJobberHand (Cutting direction)RightLength chip flute - millimeter (LCF)75Length chip flute - inch (LCF)2.9528MaterialHSS-EOverall length - millimeter (OAL)117Overall length - inch (OAL)4.6063Point Angle (SIG)135Spiral formStandard SpiralSurface treatementSteam TemperedUsable length (ULDR)4
Specifications
| ApplicationAngleIcon_DICT_SEL | Drill point 135° |
| Basic Standard | DIN 338 |
| Coating | Bronze |
| Connection (shank) description | Cylindrical shank |
| Connection diameter - millimeter (DCON MS) | 8.4 |
| Cutting diameter - inch (DC) | 0.3307 |
| Cutting diameter - millimeter (DC) | 8.4 |
| Drill Length | Jobber |
| Hand (Cutting direction) | Right |
| Length chip flute - millimeter (LCF) | 75 |
| Length chip flute - inch (LCF) | 2.9528 |
| Material | HSS-E |
| Overall length - millimeter (OAL) | 117 |
| Overall length - inch (OAL) | 4.6063 |
| Point Angle (SIG) | 135 |
| Spiral form | Standard Spiral |
| Surface treatement | Steam Tempered |
| Usable length (ULDR) | 4 |
2ACO8.4
