Dormer S90416.0 5983148 End Mill 16.00 mm
- Write a review
$139.16
Basic StandardDORMERCoatingBrightConnection diameter - inch (DCON MS)0.6299Connection diameter - millimeter (DCON MS)16Corner chamfer width - millimeter (CHW)0.2Cut lengthMediumCutting diameter - inch (DC)0.6299Cutting diameter - millimeter (DC)16Cutting diameter tolerance class (TCDC)h12Depth of cut maximum - inch (APMX)1.2598Depth of cut maximum - millimeter (APMX)32EDP number133101Flute count (NOF)4Flute helix angle (FHA)30MaterialHMMaterial applicationK - Cast iron, N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloysMID number5983148Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS90416.0Overall length - inch (OAL)3.622Overall length - millimeter (OAL)92Peripheral effective cutting edge count (ZEFP)4Radial rake angle (GAMF)12ShankCylindrical shank DIN 6535 HA
Specifications
| Basic Standard | DORMER |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.6299 |
| Connection diameter - millimeter (DCON MS) | 16 |
| Corner chamfer width - millimeter (CHW) | 0.2 |
| Cut length | Medium |
| Cutting diameter - inch (DC) | 0.6299 |
| Cutting diameter - millimeter (DC) | 16 |
| Cutting diameter tolerance class (TCDC) | h12 |
| Depth of cut maximum - inch (APMX) | 1.2598 |
| Depth of cut maximum - millimeter (APMX) | 32 |
| EDP number | 133101 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 30 |
| Material | HM |
| Material application | K - Cast iron, N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 5983148 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S90416.0 |
| Overall length - inch (OAL) | 3.622 |
| Overall length - millimeter (OAL) | 92 |
| Peripheral effective cutting edge count (ZEFP) | 4 |
| Radial rake angle (GAMF) | 12 |
| Shank | Cylindrical shank DIN 6535 HA |
5983148
