Whitney Tool 15660 Deep Slotting Cutter With Side Teeth, 5 degree Rake for Ferrous Material, 1-1/2" Cut Diameter, 5/16" Cut Widt
- Write a review
$160.75
CoatingNo CoatingCut Diameter, Inch1-1/2"Cut Diameter, Metric38.1Cut Width5/16"EDP No15660MaterialHigh Speed SteelNeck Diameter0.469Number of Teeth12OD Tolerance0.75Overall Length2-5/16"Shank Dia. Tolerance0Shank Diameter1/2"Shank Length2Shank TypeStraightStyle5° Rake for Ferrous MaterialTooth ConfigurationStraightTypeDeep Slotting CuttersWidth Tolerance0WTC No15660
Specifications
| Auxiliary lip | No |
| Design | X15 |
| Housing bore diameter | 64.287 mm, 2.531 in |
| Maximum operating temperature | 100.0 °C, 212.0 °F |
| Maximum operating temperature (°F) | 100.0 °C, 212.0 |
| Minimum operating temperature | -40.0 °C, -40.0 °F |
| Minimum operating temperature (°F) | -40.0 °C, -40.0 |
| Permissible circumferential speed | 2.54 m/s |
| Rotational speed | 1222.0 r/min |
| Seal width | 7.239 mm, 0.285 in |
| Sealing lip material | Nitrile rubber (NBR) |
| Shaft diameter | 39.7 mm, 1.563 in |
| Type of outside diameter | Metal-cased |
| Unit system | Inch |
15660