Dormer A51025/64 5970426 ADX Jobber Drill DIN 338 25/64 inch
- Write a review
$40.86
ApplicationAngleIcon_DICT_SELDrill point 130°Basic StandardDIN 338CoatingTiNCoating processPVDCoating property (CTP)1Connection (shank) descriptionCylindrical shankConnection diameter - millimeter (DCON MS)9.92Cutting diameter - fractional inch (DC)25/64Cutting diameter - inch (DC)0.3906Cutting diameter - millimeter (DC)9.92Cutting diameter tolerance class (TCDC)h8Drill LengthJobberEDP number169148Hand (Cutting direction)RightLength chip flute - inch (LCF)3.4252Length chip flute - millimeter (LCF)87MaterialHSSMaterial applicationK - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steelMID number5970426Ordering code ANSIA51025/64Overall length - inch (OAL)5.2362Overall length - millimeter (OAL)133Point Angle (SIG)130Spiral formQuick Spiral Flute Design 32°- 40°Usable length (ULDR)4
Specifications
| ApplicationAngleIcon_DICT_SEL | Drill point 130° |
| Basic Standard | DIN 338 |
| Coating | TiN |
| Coating process | PVD |
| Coating property (CTP) | 1 |
| Connection (shank) description | Cylindrical shank |
| Connection diameter - millimeter (DCON MS) | 9.92 |
| Cutting diameter - fractional inch (DC) | 25/64 |
| Cutting diameter - inch (DC) | 0.3906 |
| Cutting diameter - millimeter (DC) | 9.92 |
| Cutting diameter tolerance class (TCDC) | h8 |
| Drill Length | Jobber |
| EDP number | 169148 |
| Hand (Cutting direction) | Right |
| Length chip flute - inch (LCF) | 3.4252 |
| Length chip flute - millimeter (LCF) | 87 |
| Material | HSS |
| Material application | K - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 5970426 |
| Ordering code ANSI | A51025/64 |
| Overall length - inch (OAL) | 5.2362 |
| Overall length - millimeter (OAL) | 133 |
| Point Angle (SIG) | 130 |
| Spiral form | Quick Spiral Flute Design 32°- 40° |
| Usable length (ULDR) | 4 |
5970426
